Posts Tagged ‘Chanhassen’

Saint Michael Heating Repair Service: Inspecting Your Furnace Heat Exchanger for Leaks

Wednesday, January 25th, 2012

Like all the heating and cooling components in your Saint Michael home, your furnace needs regular maintenance and annual checkups performed by certified HVAC technicians. Here are some things that a professional heating maintenance technician can do to make sure your furnace is functioning safely.

One of the main concerns with any type of furnace is the potential for carbon monoxide gas leaks, which can be fatal if not detected. The heat exchanger is designed to prevent dangerous flue products from leaking into the home; therefore, it is important to inspect the heat exchanger for any cracks or excessive corrosion.

There are a few methods for introspecting a furnace heat exchanger for leaks and potential repairs (again, best performed by a professional HVAC technician):

  • Visual Inspection of the Furnace Heat Exchanger. Use a strong flashlight to visually check the heat exchanger thoroughly for cracks or open seams, particularly in areas that are susceptible heat or mechanical stress. Some seams may have been joined improperly during manufacturing, so be sure to check all joints. Also check for rust or corrosion in areas exposed to any type of moisture. Make sure you can gain access to all the parts of the heat exchanger. If you see any cracks, holes, or severe deterioration, your heat exchanger needs a professional repair. Ultimately, you may not be able to see all the parts of your heat exchanger, so further testing is recommended in addition to a visual inspection.
  • Flame Test. You can also observe the flame after the furnace is first turned on to detect potential damage to the heat exchanger. Turn off the furnace for at least five minutes, and sit close enough to the furnace to observe the burner flame. Have someone turn up the thermostat, and watch the flame for any changes in color or irregular patterns in the flame. If the flame makes any sudden changes, this could mean that the heat exchanger is damaged. Keep in mind that like the visual test, the flame test cannot determine damage to your heat exchanger alone.

In addition to increasing efficiency and lowering your heating bills, inspecting your furnace will ensure that your heating system operates safely throughout the winter. Along with having your heat exchanger inspected,  we recommend that you test all the carbon monoxide detectors in your home on a regular basis, as well as changing the filter every month and cleaning out the ventilation system.

If you need further assistance, or suspect any leaks in your furnace, you will need to schedule an appointment with a Saint Michael HVAC technician. Keep your home warm and safe this winter.

Tags: , , , , , , ,
Posted in Services | Comments Off

Chanhassen Heating Maintenance Guide: Furnace Safety

Monday, January 9th, 2012

There are many advantages to a properly operating furnace, and the most important ones are the safety and comfort of your Chanhassen home’s occupants. There are several things you can do to ensure the safe operation of your furnace.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breathe” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a Chanhassen heating professional to check out your furnace.

Tags: , , , , ,
Posted in Services | Comments Off

Little Canada HVAC Guide: How to Fix a Faulty Furnace Blower

Monday, December 19th, 2011

The blower fan on your furnace is designed to distribute warm air through the ductwork in your Little Canada home evenly, ensuring you use all of the energy consumed by your furnace. If the blower doesn’t turn on when the furnace turns on or it continues to run when the furnace is off, it can cost you money and result in cold rooms. Here are some tips on how to fix a faulty furnace blower.

What is the Problem?

First, check to see what the problem is. If your furnace blower remains on all of the time, it may be a thermostat issue. Make sure the fan isn’t set to stay on continuously (a common setting for most air handlers). You should also check the limit control switch to make sure it is working properly. If this is broken, it needs to be replaced which is a relatively simple fix.

If the furnace blower isn’t turning on at all, you may have a belt problem. This can be fixed by you if you have the proper tools. To repair the belt problem, first turn off all electricity to the device. You’ll need to remove the old furnace blower belt, so release the tension in the pulleys before removing the belt.

Installing a new belt is not unlike doing so for your car. Make sure to check the blower or your user manual for proper tension when you install the new belt. Make sure you purchase the right size belt and set it to the right tension. If you cannot or you do not feel comfortable doing so, you should call a professional to inspect and repair the problem for you.

Getting the Blower Back Up and Running

Once your new belt is in place, test the system carefully, starting with the lowest setting (if there are variable settings). If it does not yet work or if something sounds strange, call a technician right away. You don’t want the motor to burn out or something else more substantial to go wrong with your furnace or air handler during the middle of the winter.

Tags: , , , , , ,
Posted in Services | Comments Off

Five Important HVAC Maintenance Tips from a Rosemount Heating Contractor

Wednesday, December 7th, 2011

Do you have a “mental checklist” of chores that need to be done a regular basis around your Rosemount home, such as cleaning the window treatments, washing windows, shampooing rugs, etc.? There are various areas of your home that need regular maintenance and cleaning – and that list includes your heating and cooling (HVAC) equipment. Do you know a poorly operating furnace can cost you in increased energy usage and higher utility bills? That same poorly operating furnace can be discharging harmful carbon monoxide gas into your home, creating a health risk.

So, it is important to keep your furnace in peak operating condition and the best way to do that is by making a checklist of HVAC maintenance tasks. Let’s look at five of them.

  1. Check your filters. Routine replacement of your furnace filters should be every 1-3 months, depending on the indoor air quality of your home, number of occupants, size, etc. You can purchase disposable filters online, at a local “big box’ retailer, or from your local HVAC contractor. A visual inspection of your filter is the best way to determine if it needs replacing. If you have a removable electronic filter, it should be cleaned every few months using soapy water and a hose. Any restrictions to air flow through the filters can lead to poor indoor air quality and will cause your furnace to work even harder to circulate warm air through your duct system.
  2. Clean and insect the blower assembly and motor. You can do this with a vacuum. Also check the fan belt to make sure it is not too loose or if it has any cracks or splits.
  3. Look for any obstructions in vents and returns. Believe it or not, your furnace needs “help” to operate. Any build-up of dirt or debris around the grilles of your ventilation system will just make your furnace work a lot harder. Do a visual check inside and outside and pay special attention to flues and chimneys, where indoor air is exhausted. Any blockage can result in an accumulation of poisonous carbon monoxide gas.
  4. Keep the area clean and clear around your furnace and water heater. Never store flammable liquids near your heating equipment. Your furnace room is not a storage closet.
  5. Revisit your home’s insulation. When was the last time you checked out the insulation in your attic or crawlspace? Is it securely in place or drooping down? Are there bald spots where the insulation has deteriorated? Is the insulation sufficient or should it be upgrade?

Tags: , , , , , ,
Posted in Services | Comments Off

Will Switching to Geothermal Save Me Money? A Question From Chanhassen

Monday, September 12th, 2011

There are simply a ton of different types of heating systems in Chanhassen and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

When you are trying to assess whether or not switching to a geothermal heating system will save you money, you first have to start with the heating bills you currently have. Then, factor in the cost of the geothermal heat pump installation as opposed to the installation of a more conventional system.

You are then in a position to see whether or not the amount the geothermal system will save you each month is enough to offset the higher cost of installation within a reasonable amount of time. Of course, the savings will always eventually add up over time, but if the length of time it will take you to break even is the same or longer than the expected life of the system, it is probably not worth it to invest in this type of heating.

Tags: , , , , ,
Posted in Services | Comments Off

The Facts about Indoor Air Quality

Friday, July 1st, 2011

One of the least understood aspects of your home’s comfort system is the indoor air quality. Most people assume that once they have a good furnace and air conditioner installed, there’s nothing left to worry about. However, with the push in the last 20 years to reduce energy loss through poor insulation, most homes are sealed up tighter than ever before. This doesn’t just cause stuffy indoor air – it can actually lead to illness.

How Bad Can Indoor Air Quality Get?

Homes built in the 1980s were recommended to have one third of the ventilation of those built before. Today, the standards have returned to their original levels, but for many years, homes were built with poor ventilation and excessive insulation. The result is a space that holds the air in too well. Everyday contaminants and allergens like dust, pollen, pet dander, mold, or smoke cannot get out of your home and as a result, you can get sick.

In fact, some people even suffer from Sick Building Syndrome (SBS). This is when they feel ill constantly, with respiratory symptoms that have no root cause and are hard to diagnose. Often, it is because they simply breathe too many contaminants and too much stale air.

Fixing Air Quality Is Simple

The first thing needed to fix air quality is a good filtration system. Despite what many people think, simple filtration is not that expensive. There are big, powerful purification systems with advanced ionization units and UV lighting to kill bacteria and viruses, but most families are served well with a simple HEPA filter to remove things like dust, pollen and dander.

It’s a good idea to have your indoor air quality tested, however, just to make sure other contaminants are not present. High humidity can lead to mold growth, and poor ventilation can lead to exhaust or gas fumes in your home. A good carbon monoxide detector is recommended for the latter, but testing should be done to make sure nothing else is floating around.

Finally, make sure your home is properly ventilated. Standard ventilation tends to leak heated or cooled air outside, so many homeowners now opt for energy recovery ventilators. These systems have heat exchangers that transfer warm air between indoor and outdoor air.

However you want to fix your indoor air quality issues, know that there are plenty of things you can do with the help of a good filtration device and regular cleanings of your ductwork and vents.

Tags: , ,
Posted in Services | Comments Off