Serving Minneapolis, St. Paul and the Surrounding Communities
Home / About / Blog / How to Clean Your Outdoor HVAC Unit in Carver County
How to Clean Your Outdoor HVAC Unit in Carver County
That big metal box in your Carver County backyard or on the side next to your home plays a vital role in cooling your home and keeping you comfortable. That box is called the outdoor condensing unit, the key component in your home’s central air conditioning system. The condensing unit houses the compressor, which converts gas into fluid before sending it to the condenser coil, where it is cooled and sent to an indoor evaporator coil. What you need to know is that the entire heat pump runs smoothly when the area inside and around the condensing unit is clean and free of debris. In some cases, the outdoor unit will fail to work if there is too much debris or dirt build-up. That can cost you a lot of money in repairs or a total replacement. Keeping the condensing unit clean is not a difficult chore – and here are some steps you can take. First of all, try and avoid blowing leaves or grass clippings near the unit. And regularly cut down or remove any weeds or grass that may grow up around the base of the unit. To clean the inside of the unit, first turn off the electrical power to it. Check for an on-off switch on the unit or on a separate box nearby. Remove the grille from the unit and carefully remove the fan in order to gain access to the coil and other moving parts. At this point, you should be able to clean out any debris from inside the unit using your hands. You can also use a vacuum hose to remove debris. A soft brush or cloth rag can be used to other areas of the unit. The fins on the coil require a gentler approach as they can be easily bent or damaged. If you notice a bent fin you can straighten it out by using a simple dull knife or a special fin “comb” which you can buy at your local hardware store. While you are in the unit, check the fan belt on the motor to ensure it is not damaged or cracked. You can also add extra oil to lubrication ports on the condensing unit, if any are available. Use a garden hose to clean the coil and the grilles on the condensing unit. Do not use highly-pressurized water as it may cause some damage to the fins. Once this last task has been completed, reinstall the grille, switch on the condensing unit, and start up your air conditioning. You should notice if your house is cooling down quicker. If not, you may want to do some more cleaning. If you have any doubts about cleaning your outdoor condensing unit or if you find any damaged parts that may need repair or replacement, call your local qualified heating and cooling (HVAC) contractor, Air Mechanical, and schedule a service call.
Air Mechanical is committed to compliance with its obligations under all applicable state and federal laws prohibiting discrimination on the basis of actual or perceived race, color, creed, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, familial status, veteran status, sexual orientation, genetic information, public assistance, local human rights commission activity or any other characteristic protected by applicable federal, state, or local laws.